خانه محصولاتواحدهای تصفیه هوا

Floor Standing Direct Expansion Air Handling Unit With Condenser 30000-60000m3h

Floor Standing Direct Expansion Air Handling Unit With Condenser 30000-60000m3h

    • Floor Standing Direct Expansion Air Handling Unit With Condenser 30000-60000m3h
    • Floor Standing Direct Expansion Air Handling Unit With Condenser 30000-60000m3h
    • Floor Standing Direct Expansion Air Handling Unit With Condenser 30000-60000m3h
  • Floor Standing Direct Expansion Air Handling Unit With Condenser 30000-60000m3h

    جزئیات محصول:

    Place of Origin: China
    نام تجاری: EuroKlimat
    گواهی: ISO9001, ISO14001, OHSAS18001, CRAA, CQC
    Model Number: EKDX

    پرداخت:

    Minimum Order Quantity: 1
    قیمت: negotiation
    Packaging Details: Plywood
    Delivery Time: 15 working days after received your payment
    Payment Terms: L/C, T/T
    Supply Ability: 5,000pcs per month
    اکنون تماس بگیرید
    توضیحات محصول جزئیات
    Product Name: Air Handling Unit with condenser units Installation: Ceiling/floor installation
    Cooling Capacity(kW): 75-300 Heating Capacity(kW): 82.5-330
    Air Flow(m3/h): 30,000-60,000 Aluminum Fins: Shutter-type hyperbolic and hydrophilic fins
    Test Pressure (Mpa): 3.3 Coils rows: 4/6

     

    Air flow 30,000-60,000 m3h direct expansion Air Handling Units with condenser unit

     

     

    Features of EK clean-room air handling unit EK clean-room air handling unit is specifically designed for clean rooms. It provides a built-in cooling and heating source, integrates air handling and automatic control functions, and has the following features: low investment, simple system, efficient running, and easy installation and maintenance.

     

    ■ The unit has a simple design and easy control, and is suitable for independent use.

     

    ■ The indoor unit can be directly mounted to the ceiling or in an attached room, not requiring a special air-conditioner room.

     

    ■ No chilled or cooling water system is required. The control is simple. The project can be completed phase by phase at a low construction cost.

     

    ■ The maintenance is simple. Maintenance of a single unit requires only the space of the clean room.

     

    ■ The unit can run at temperature ranging from -10°C to 48°C.

     

    Applicable to scenarios with constant-temperature constant-humidity control requirements

     

    This unit is equipped with high-quality DDC controllers, basic direct-expansion coils, a primary-efficient filter (G4) and a medium-efficient filter (F8), pressure difference display control, non-step electric heating, a high-quality proportional electrode humidifier, and smart EK air-conditioner control solution, meeting requirements of a constant-temperature project for different granularity temperature and humidity control.

     


    Specifications

     

    Model Indoor unit EKDX300-75A/ EKDX300-75AR EKDX300-150A/ EKDX300-150AR EKDX400-200A/ EKDX400-200AR EKDX500-250A/ EKDX500-250AR EKDX600-300A/ EKDX600-300AR
    Outd-oor unit 2xEKAA150AB/
    2xEKAA150ARB
    4xEKAA150AB/
    4xEKAA150ARB
    8xEKAA100AB/
    8xEKAA100ARB
    8xEKAA125AB/
    8xEKAA125ARB
    8xEKAA150AB/
    8xEKAA150ARB
    Nominal cooling capacity (1) kW 75 150 200 250 300
    Nominal heating capacity (1) kW 82.5 165 220 275 330
    Nominal cooling capacity (2) kW 65 126 169 208 252
    Nominal heating capacity (2) kW 71.5 138 186 228 276
    Air flow m3/h 30000 30000 40000 50000 60000
    EKDM air handling unit model corresponding to the external height and width   EKDM1312H EKDM1312H EKDM1022H EKDM1026H EKDM1324H
    Refrigerant model   R22
    Outer dimensions of indoor unit Length mm As per the number of function sections
    Height mm 2130 2130 1650 1650 2130
    Width mm 1970 1970 3620 4260 3940
    Outer dimensions of outdoor unit
    (W × D × H)
    mm

    2x1290x840

    x1840

    4x1290x840

    x1840

    8x990x840

    x1840

    8x990x840

    x1840

    8x1290x840

    x1840

    Compressor of outdoor unit Model Fully hermetic volute
    Outdoor unit weight kg 2x285 / 2x300 4x285 / 4x300 8x265 / 8x280 8x270 / 8x285 8x285 / 8x300
    Power supply of outdoor unit   380V/3N~/50HZ
    Cooling input power of outdoor unit kW 32.26 / 34.94 64.52 / 69.88 81.64 / 80.68 96.8 / 98.0 129.04 / 139.76
    Heating input power of outdoor unit kW -- / 29.4 -- / 58.8 -- / 81.2 -- / 80 -- / 117.6
    Connecting pipe
    specifications
    Liquid pipe

    φmm

    (in.)

    15.88(5/8) 15.88(5/8) 15.88(5/8) 15.88(5/8) 15.88(5/8)
    Gas pipe

    φmm

    (in.)

    34.9(1-3/8) 34.9(1-3/8) 28.6(1-1/8) 28.6(1-1/8) 34.9(1-3/8)
    Connect mode   Soldering

     

    Note:
    ■ The nominal cooling capacity (1) is measured under the following conditions: The indoor dry/wet bulb reads 27/19 °C and the outdoor dry/ wet bulb reads 35/24 °C. The nominal heating capacity (1) is measured under the following conditions: The indoor dry bulb reads 20 °C and the outdoor dry/wet bulb reads 7/6 °C.

     

    ■ The nominal cooling capacity (2) is measured under the following conditions: The indoor dry/wet bulb reads 24/17 °C and the outdoor dry/wet bulb reads 35/24 °C. The nominal heating capacity (2) is measured under the following conditions: The indoor dry bulb reads 24 °C and the outdoor dry/wet bulb reads 7/6 °C.

     

    ■ The nominal cooling capacity does not consider heat losses of the fan motor of the indoor unit. The external static pressure can be customized, in which case the power of the air supply motor changes accordingly.

     

    ■ The specifications are subject to change due to product improvements without prior notice.

     

    ■ The fresh air flow of the unit cannot be larger than 20%.


    Consolidated Structure

     

    The unit features a compact structure, easy assembly, and solid seal. It adopts special seal glue handling, providing air leakage rate as low as 0.3%. The 30mm (standard)/50mm (optional) enhanced high-pressure non-fluorine polyurethane double-layer foamed panel delivers a solid insulation performance and high bearing capacity, meeting requirements of a purifying unit for high residual pressure.

     

    High Efficient and Low Noise

     

    The outdoor unit adopts brand-name fully hermetic volute compressors that deliver high efficiency, low noise, and strong resistance to hydraulic shock and run at temperature ranging from -10°C to 48°C, meeting cleaning requirements in various regions and scenarios.

     

    The indoor unit adopts imported high-quality centrifugal fans with double air intakes (model selection of the fans has passed AMCA certification) or unhoused fans (optional), and is equipped with dedicated anti-vibration measures for quiet running.

     

    Load Matching

     

    The evaporation section of the indoor unit can be equipped with a bypass valve. The direct evaporation coil supports combination with multiple cooling capacity options according to different conditions for a wide range of fresh air/air return scenarios. The outdoor unit of a large-capacity cooling unit adopts modular design, allowing differential energy regulation during use, lowering the operating cost, and reducing shock on the grid at startup.

     

    Sterilization

     

    The indoor unit adopts a dry water drainage tray that has no residual condensed water and prevents bacteria. A stainless steel water tray is optional. In addition, a sterilization device such as efficient UV sterilization lamp and ozone generator can be configured as required to eliminate bacteria and effectively
    suppress microbes in the system.

     

    Saving Investment

     

    The unit has a built-in cooling and heating source and does not require a chilled or cooling water system, greatly saving user investment, and making the unit structure simple and compact. No dedicated equipment room is required. The unit can run immediately after cabling and piping. The installation, use, and maintenance are easy.

     

    Smart Control

     

    The unit adopts integrated digital electromechanical design and is equipped with a smart controller, providing multiple control functions such as constant temperature, constant humidity, function setting, fault alarm, and remote monitoring to ensure safe and reliable unit running.

     

    Prevention of Cold Bridge

     

    The unit adopts inner skeleton design and high-strength foam seals and tight repair door structure, effectively preventing cold bridge between wall plates, between wall plate and inner skeleton,
    or at the repair door. The panel of the unit is wrapped with solid insulating UPVC plastic at all sides, avoiding direct contact with thermal conductive parts, providing T1 class insulation performance, eliminating cold bridge, and preventing cooling loss.

     

    High-Quality Filters

     

    The unit adopts a high-quality multi-level (primary, medium, sub-high, and high efficiency) air filtering system. The filtering class meets the requirements of a special clean room, and can effectively suppress organic compounds on the filtering paper.

     

    Purification Design

     

    A special frame structure ensures smooth surface in the unit. The inner stainless steel surface and an efficient heat exchanger (optional) made of hydrophilic aluminum foil can effectively prevent dust accumulation and re-entrainment. The special design and materials can resist disinfectant and air erosion and are favorable for regular cleaning and sterilization.

     

    Multi-System Design

     

    The outdoor unit adopts modular design and starts level by level, efficiently reducing shock on the grid. Multiple levels of cooling are provided, allowing differential energy regulation under different load conditions and reducing the operating cost. The compressors wear in a balanced manner, prolonging the lifecycle.

    اطلاعات تماس
    Guangdong EuroKlimat Air-Conditioning & Refrigeration Co., Ltd

    تماس با شخص: LENG

    ارسال درخواست خود را به طور مستقیم به ما (0 / 3000)

    سایر محصولات